Volumetric Bilob Pump
100% volumetric pumps, for the delicate transfer of your vintage ... as by hand
This pump is equipped with an elliptical single-rotor biloba, and a separator valve, which are the only two moving parts.
It is associated with a feeding screw which serves as a transmission shaft at the same time, and has a "squirrel cheek". This bulge acts as a regulator between the continuous flow rate of the feeding screw and that of the rotor.
Given its particular shape, and its low speed of rotation, 30 to 60 rpm, the material is regulated volumetrically above the valve, since the latter remains permanently plated on the rotor, and the phenomenon of wear is Therefore always compensated.
This pump is ideal for transferring fragile products such as fruits.
Motorization 4 to 5.5 kW on pump 500
Motorization 7.5 kW on pump 900
Y connection with control tank
Electronic Limi-stop "N" mounted in a discontactor boxï»¿ï»¿
Limi-stop "CD" ( Remote Control )
Electric switchbox inverter that meets C.E. standards
Ã¸ / pas
Stainless steel pump Rotor, Inspection flap, Stainless steel valve
Kinematics of the product in the pump.